Publications

Journals Published

1. Sekar Saladi, Satish Tailor, Shrikant Joshi et al.,(2025). Synergistic effect of nano-CeO2 and graphene nanoplatelet reinforcements on characteristics and wear behaviour of Cr3C2-NiCr coatings, Journal of Materials Engineering and Performance, Sep. 2025. (Just Accepted)

2. Annadaa Dash, Satish Tailor, Jyotsna Dutta Majumdar, (2025). Studies on Corrosion Resistance (in 3.56 wt.% NaCl solution) of Thermal Sprayed CoNiCrAlY (Mechanically Milled) on Inconel 718 Substrate, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, July 2025. https://doi.org/10.1177/09544062251368718

3. S Tailor*, A Modi (2025), “Dense Al2O3 coating performance and its corrosion properties in molten zinc for sink roll applications”, Ceramics International, 51 (4), 5061-5068. https://doi.org/10.1016/j.ceramint.2024.11.478

4. André McDonald, S Tailor et al., (2025). “With Gratitude to Our Guest Editors and Reviewers for Their Critical Contributions in 2024”,  J Therm Spray Tech.  https://doi.org/10.1007/s11666-025-01962-0

5. Satish Tailor*, Ankur Modi (2024), Behavior of high-velocity oxygen fuel sprayed chromium-coating on Zircaloy-4 fuel cladding under loss-of-coolant accident conditions, Materials Letters, Volume 377, 137431. https://doi.org/10.1016/j.matlet.2024.137431

6. Tailor, S. (2024), “Special Issue Showcasing Contributions from the Asian Thermal Spray Conference & Expo (ATSC) 2023”, J Therm Spray Tech 33, 2511–2512. https://doi.org/10.1007/s11666-024-01871-8

7. Amarjit Singh, Harish Singh Dhami, Manoj Kumar Sinha, Rajesh Kumar Sharma, Munish Kumar Gupta, Mehmet Erdi Korkmaz, Satish Tailor, Jarnail Singh & Ravi Kuma, (2024) “Modeling, deposition, and mechanical characterizations of single-step surface coating using high-speed grinding”, Int J Adv Manuf Technol., 1-11. https://doi.org/10.1007/s00170-024-14220-4

8. Arshiya Ansari, Shahzad Ahmed, Moin Ali Siddiqui, Afzal Khan, Satish Tailor, Prashant Kumar, Pranay Ranjan, Devendra Singh Negi, (2024), “PEDOT:PSS, TiO2 Nanoparticles, and Carbon Quantum Dot Composites as Ultraviolet Sensors”, ACS Applied Nano Materials 7 (8), 9789-9799. https://doi.org/10.1021/acsanm.4c01897

9. Shahzad Ahmed, Arshiya Ansari, Shashwat Bishwanathan, Satish Tailor, Pranay Ranjan, (2024) “Electronic Tongue Based on ZnO/ITO@glass for Electrochemical Monitoring of Spiciness Levels”, Langmuir 40 (8), 4434-4446. https://doi.org/10.1021/acs.langmuir.3c03763

10. Amit Kumar, Manoj Kumar, Satish Tailor, (2023), “Tribological behaviour of HVOF-sprayed Ni-based self-lubricating composite coatings”, Transactions of the IMF 101 (6), 320-328. https://doi.org/10.1080/00202967.2023.2185974

11. HR Chauhan, S Saladi, S Variya, A Solanki, S Tailor, KP Sooraj, et al. (2023), “Role of micro-and nano-CeO2 reinforcements on characteristics and tribological performance of HVOF sprayed Cr3C2-NiCr coatings”, Surface and Coatings Technology, 467, 129684. https://doi.org/10.1016/j.surfcoat.2023.129684

12. Rampal, Anil Kumar Singla, Anuj Bansal, Satish Tailor et al. (2023), “Development, Characterization, and Cavitation Erosion Analysis of High Velocity Oxy-Fuel (HVOF) sprayed TiC and (70Cu-30Ni)-Cr Based Composite Coatings on SS316 Steel”, May 2023, Tribology International 186(1):108621.  https://doi.org/10.1016/j.triboint.2023.108621

13. Akshay R. Govande , Satish Tailor, Ratna Sunil Buradagunta, Ravikumar Dumpala, (2023), “Effect of inert environment on the sliding wear behaviour of the HVOF sprayed WC-12Co coating”, International Journal of Refractory Metals and Hard Materials 111, 106109. https://doi.org/10.1016/j.ijrmhm.2023.106109

14. Amit Kumar, Manoj Kumar, Satish Tailor, (2023), “Self-lubricating composite coatings: A review of deposition techniques and material advancement”, Materials Today Proceedings. https://doi.org/10.1016/j.matpr.2023.01.035

15. FJ Joseph, SB Arya, S Tailor, (2022), “Hot corrosion behavior of Al2O3 + Sm2SrAl2O7 composite thermal barrier coatings”, Materials and Corrosion 73 (12), 2004-2008. https://doi.org/10.1002/maco.202213401

16. Fredy James Joseph, Shashi B Arya, Satish Tailor, (2022), “Erosion behavior of Al2O3 + Sm2SrAl2O7 composite thermal barrier coatings”, Materials Today: Proceedings, Volume 66, Part 9, 2022, 3853-3858. https://doi.org/10.1016/j.matpr.2022.06.294

17. S Tailor, N Vashishtha, A Modi, SC Modi, (2021), Oxidation control in arc-sprayed SS420 coating, Surface Engineering 37 (5), 581-589. https://doi.org/10.1080/02670844.2020.1840696

18. S Tailor, N Vashishtha, A Modi, SC Modi, (2020), “Microstructure evolution and mechanical properties of Al2O3-40% TiO2 coating by Hybrid-Low Velocity OxyFuel process”, Physica Scripta 96 (2), 025702. https://doi.org/10.1088/1402-4896/abce37  

19. S Tailor, N Vashishtha, A Modi, SC Modi, (2020), “High-performance Al2O3 Coating by Hybrid LVOF (Low Velocity OxyFuel) Process”, Journal of Thermal Spray Technology, 2020, 29, 1134-1143.1. https://doi.org/10.1007/s11666-020-01033-6

20. Satish Tailor*, Nitesh Vashishtha, Ankur Modi, S.C. Modi, (2020), “One-Step Fabrication of Thermal Sprayed Polymer Coating on Metals”, Materials Research Express 7 (1), 016425. https://doi.org/10.1088/2053-1591/ab6a4f

21. S Tailor, N Vashishtha, A Modi, SC Modi, (2020) “An Investigation on Splat and Flattening Behavior of Thermally Sprayed Copper on A Rough Surface: A New Approach”, Journal of Thermal Spray and Engineering 2 (1), 37-42. https://doi.org/10.52687/2582-1474/211

22. Satish Tailor*, Ankur Modi, S.C. Modi, (2019), “Synthesis, Microstructural, Corrosion and Antimicrobial properties of Zn and Zn-Al coatings”, Surface Engineering 35 (8), 736-742. https://doi.org/10.1080/02670844.2019.1565680

23. S Tailor, N Vashishtha, A Modi, SC Modi, (2019), “Structural and mechanical properties of HVOF sprayed Cr3C2-25% NiCr coating and subsequent erosion wear resistance”, Materials Research Express 6 (7), 076435. https://doi.org/10.1088/2053-1591/ab1947

24. Satish Tailor*, Ankur Modi, S.C. Modi, (2019), “Thermally sprayed thin copper coatings by W-HVOF”, Journal of Thermal Spray Technology. 2019, 28, 273-282.  https://doi.org/10.1007/s11666-018-0770-7

25. S Tailor, N Vashishtha, A Modi, SC Modi, (2019), “Thermally sprayed porous PEEK coating for biomedical implants, Journal of Thermal Spray and Engineering 1 (1), 32-36. https://doi.org/10.52687/2582-1474/116

26. R Upadhyaya, S Tailor, S Shrivastava, SC Modi, (2018) “High performance thermal-sprayed WC-10Co-4Cr coatings in narrow and complex areas, Surface Engineering,34 (5), 2018, pp. 412-421. https://doi.org/10.1080/02670844.2017.1375175

27. Satish Tailor*, Ankur Modi, S.C. Modi, (2018) Effect of controlled segmentation on the thermal cycling behavior of plasma sprayed YSZ thick coatings, Ceramics International, 44(6), pp.6762-6768. https://doi.org/10.1016/j.ceramint.2018.01.094

28. Satish Tailor*, Ankur Modi, S.C. Modi, (2018), High-Performance Molybdenum Coating by Wire-HVOF Thermal Spray Process, Journal of Thermal Spray Technology. 2018, 27, pp. 757-768. https://doi.org/10.1007/s11666-018-0706-2

29. Satish Tailor, Pranay A Bagde, Sanjay Sapate* et al. (2018), Friction and Wear Behaviour of Plasma Sprayed Cr2O3-TiO2 Coating, Materials Research Express,  5 (2), 026410.  https://doi.org/10.1088/2053-1591/aaacf4

30. Satish Tailor*, Rohit Upadhyaya, Manjunath S.Y., A.V. Dub, Ankur Modi, S.C. Modi, (2018), “Atmospheric plasma sprayed 7%-YSZ thick thermal barrier coatings with controlled segmentation crack densities and its thermal cycling behavior”, Ceramics International, 44(3), pp. 2691-2699. https://doi.org/10.1016/j.ceramint.2017.10.219

31. Satish Tailor, A. G. Rakoch, A. A. Gladkova, Manjunath S. Y., (2018), “Kinetic Features of Wear-Resistant Coating Growth on Ti-Alloy by Plasma Electrolytic Oxidation”, Surface Innovations, 6 (3), pp. 150-158. https://doi.org/10.1680/jsuin.17.00054

32. Satish Tailor*, Rohit Upadhyaya, Sharad Shrivastava, Aleksandra A. Gladkova, and S C Modi, (2017), “Effect of electroless Ni-plating on the properties of Cold Sprayed Ni-Al2O3 Coatings”, Surface Innovations, 5 (2), pp. 97-105. https://doi.org/10.1680/jsuin.16.00030

33. Swati Apurva*, Satish Tailor, and Neera Rastogi, (2017) Smart Materials for Smart Cities and Sustainable Environment, J Mat. Sci. Surf. Engg., 5 (1), pp. 520-523. https://www.jmsse.in/files/515_Swati%20et%20al..pdf

34. Satish Tailor*, Manoj Singh, R. M. Mohanty and A. V. Doub,(2016) “Microstructural and Thermal properties of Plasma Sprayed YSZ Nano-Clusters Thermal Barrier Coatings”, Journal of Cluster Science. 27(5), pp. 1501-1518. https://doi.org/10.1007/s10876-016-1025-8

35. Satish Tailor*, R. M. Mohanty, P. R. Soni and A. V. Doub, (2016) Wear Behavior of Plasma Sprayed Nanostructured Al-SiCp Composite Coatings: A Comparative Study, Transactions of the Indian Institute of Metals, 69(6), pp.1179-1191. https://doi.org/10.1007/s12666-015-0692-8

36. Satish Tailor*, Manoj Singh and A. V. Doub, (2016) “Synthesis and Characterization of Yttria-Stabilized Zirconia (YSZ) Nano-Clusters for Thermal Barrier Coatings (TBCs) Applications, Journal of Cluster Science. 27(4), pp. 1097-1107. https://doi.org/10.1007/s10876-016-1014-y

37. Satish Tailor*, V. K. Sharma, R. M. Mohanty, P. R. Soni and A. V. Doub, (2016) Nano-structured 2024Al-SiCp composite coatings, Surface Engineering, , 32, Issue 7, 2016, pp. 526-534. https://doi.org/10.1179/1743294414Y.0000000391

38. Satish Tailor*, R. M. Mohanty and A. V. Doub, (2016)  Development of a new TBC system for more efficient gas turbine engine application, Materials Today: Proceedings, Volume 3, Issue 8, pp. 2725-2734. https://doi.org/10.1016/j.matpr.2016.06.019

39. Satish Tailor*, V. K. Sharma, R. M. Mohanty and P. R. Soni, (2014) Fabrication and Wear Behaviour of Nanostructured Plasma Sprayed 6061Al-SiCp Composite Coating, Journal of Thermal Spray Technology. Volume 23, pages 1081–1088. https://doi.org/10.1007/s11666-014-0065-6

40. 38. Satish Tailor*, Swarniv Chandra, R. M. Mohanty and P. R. Soni, (2013) Energy Transport During Plasma Enhanced Surface Coating Mechanism: A Mathematical Approach, Advanced Materials Letters, Vol. 4 (12), pp. 917-920. https://doi.org/10.5185/amlett.2013.5476

41. Satish Tailor*, V. K. Sharma, R. M. Mohanty and P. R. Soni, (2013) A Review on Plasma Sprayed Al-SiC Composite Coatings, Journal of Mat. Sc. & Sur. Engg., Vol. 1(1), pp. 15-22. https://doi.org/10.52687/2348-8956/115

42. Satish Tailor*, V. K. Sharma, R. M. Mohanty and P. R. Soni, (2012) Microstructure, Adhesion and Wear Properties of Plasma Sprayed AlSi-SiC Composite Coatings, Journal of Surface Engineered Materials and Advanced Technology; Special Issue, Vol. 2 (3A), 2012, pp. 227-232. 10.4236/jsemat.2012.223035

43. Satish Tailor*, V. K. Sharma, R. M. Mohanty and P. R. Soni, (2012) Plasma Sprayed Coating of Mechanically Alloyed 6061Al-SiCp Nano Composite, Transaction of Powder Metallurgy Association of India, PMAI, Vol. 38, pp. 113-117.

44. Satish Tailor*, V. K. Sharma, R. M. Mohanty and P. R. Soni, (2012)  Study of the Effect of Mechanical Alloying on 2024Al-SiCp Composite, Journal of Metallurgical and Mining Industry, Vol. 4, Issue 1, pp. 51-54.

45. Satish Tailor*, V. K. Sharma and P. R. Soni, (2010) Plasma Spray Coatings: State Of The Art, Transaction of Powder Metallurgy Association of India, PMAI, Vol. 36, pp. 127-131.

-----------------------------------------------------------------------------------------

Conference Publications

1. Satish Tailor*, Ankur Modi, (2025/10/06),Hybrid-LVOF sprayed Dense Al2O3 coating performance and its corrosion properties in molten zinc for sink roll applications, CORCON 2025, Jaipur, India.  

2. Satish Tailor*, Ankur Modi, (2025/08/26), Coatings for Gas Turbines: A Comprehensive Review, Indigenisation in Marine Gas Turbine Technology – Way Ahead”, AT INS EKSILA, Visakhapatnam, India. 

3. Satish Tailor*, Ankur Modi, (2025/05/07), HVOF-sprayed Cr-coating on Zircaloy-4 fuel cladding under loss-of-coolant accident conditions, International Thermal Spray Conference and Exhibition 2025, Vancouver, Canada.

4. Satish Tailor*, Ankur Modi, (2024/05/01), Investigation of Dense Al2O3Coating Performance in Molten Zinc, International Thermal Spray Conference and Exhibition 2024, Milan, Italy.

5. Satish Tailor*, Ankur Modi, (2024/05/01), Fabrication and characterization of W-Cu functionally graded bulk coating by SPRAYCOLD® process for Plasma-facing components (PFCs) applications, International Thermal Spray Conference and Exhibition 2024, Milan, Italy.

6. Satish Tailor*, Ankur Modi, (2024/07/18), Fabrication and characterization of W-Cu functionally graded bulk coating by SPRAYCOLD® process for Plasma-facing components (PFCs) applications, International Conference on Advancements in Thermal-Spray (ICOAT-2024), Indian Institute of Technology Patna.

7. Satish Tailor*, Ankur Modi, (2023/05/23), Investigation of Dense Al2O3 Coating Performance in Molten Zinc, International Thermal Spray Conference and Exhibition 2023, Quebec City, Canada.

8. Satish Tailor*, Ankur Modi, (2021/05/24), New developments to deposit dense thin ceramic coatings: Introducing A new technology for dense thin ceramic coatings, International Thermal Spray Conference and Exhibition 2021, virtual conference due to Covid.

9. Satish Tailor*, Ankur Modi, (2020/03/05), Dense Ceramic Coatings and Its Process: A new Development, 6th Asian Conference on Heat Treatment & Surface Engineering, Chennai Trade Centre in Chennai, India.

10. Satish Tailor*, Ankur Modi, (2020/11/01), Al2O3-40%TiO2 coating by Hybrid Low Velocity OxyFuel Process, Asian Thermal Spray Conference 2020, Ningbo, China.

11.  Satish Tailor*, Ankur Modi, (2019/05/26), Development of thermal sprayed thin dense Ceramics coatings, International Thermal Spray Conference and Exhibition 2019, YOKOHAMA, Japan, 26-29th May, 2019.

12. Satish Tailor*, Ankur Modi, S.C. Modi, (2018/05/07), Development of thermal sprayed thin copper coatings, International Thermal Spray Conference and Exhibition 2018, Orlando, Florida,  USA.

13. Satish Tailor, (24-25th Jan 2019) Development of New Industrial High Quality Ceramic Coatings, invited presentation in National Conference on Industrial Coatings, at IMMT Bhubhaneshwar.

14. Satish Tailor, (23-26 Sep, 2019) Thermal Sprayed dense polymer coatings, CORCON-2019, Mumbai, BEST paper award.

15. Satish Tailor*, Ankur Modi, S.C. Modi, (2018 Sep 30-Oct 3rd), Comparison of corrosion protection properties of arc sprayed Zinc and ZINCAL coating, Proceedings of CORCON-2018, NACE Intr., 2018, pp. 1-8. Jaipur, Rajasthan, India.

16. Satish Tailor, (16-18 Nov., 2018) New Hardware to Get HVOF-Grade High Quality Ceramic Coatings, Asian Thermal Spray Conference-2018, NTU Singapore.

17. Satish Tailor, (19 Feb., 2018) National Seminar on Emerging Trends in Repair, reclamation and Life Extension of Helicopters, Aero engines and their Aggregates, and delivered Invited oral presentation on Advance thermal spray technology for aero-engine components, 3 BRD, Air Force, Chandigarh,

18. Satish Tailor, July, 2018) An Introduction to Thermal Spraying and its Applications in Post Indo-Japan Symposium Workshop on Thermal Spray Coatings and Applications, IIT Madras.

19. Satish Tailor, AV Doub, (10-14 July, 2016) Synthesis and Characterization of Yttria-Stabilized Zirconia (YSZ) Nano-Clusters for Thermal Barrier Coatings (TBCs) Applications, Lausanne, Switzerland.

20. Satish Tailor, AV Doub, (20-22 July,2015) Development of a new TBC system for more efficient gas turbine engine application, Aveiro, Portugal.

21. Satish Tailor, R. M. Mohanty and P. R. Soni, (24-26 Nov. 2014) Microstructure and Dry sliding wear behavior of atmospheric plasma sprayed nanostructured 2024Al-15 wt.% SiCp composite coatings, Asian Thermal Spray Conference [ATSC], ARCI, Hyderabad, India.

22. Satish Tailor, Delivered Keynote lecture on Nano Composite Coatings by Plasma Spraying, in All India Seminar on Nano Technology Applications (NTA-2012) held at Malaviya National Institute of Technology Jaipur.

----------------------------------------------------------------------------------------------------------------------------------------------------

List of other Publications

Book Chapters

1. Satish Tailor*, Ankur Modi, S.C. Modi, High Performance WC-Based Coatings for Narrow and Complex Geometries, In book: Advanced Coating Materials, Chapter: 6, Publisher: WILEY-Scrivener Publishing LLC, USA, 2019, pp. 157- 174. https://doi.org/10.1002/9781119407652.ch6

2. Satish Tailor*, Ankur Modi, (2024) Fabrication and Characterization of W-Cu Functionally Graded Bulk Coating by Cold Spray Process for Plasma-Facing Components (Pfc) Applications, SSRN,1-23. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4944273

Monographs

1. Satish Tailor, UPGRADING COATING SOLUTIONS, Chemical Today Magazine

2. Editorial in SPRAYTODAY Magazine

3. Technical note on copper has the potential to help in fight against COVID-19 in SPRAYTODAY Magazine

Technical Reports

1. Satish Tailor*, Ankur Modi, Manjunath S Y and S C Modi, Development of controlled segmentation crack densities in plasma sprayed-7%YSZ thick thermal barrier coatings, Thermal Spray Bulletin, Specialist Article, 2017, 2, pp. 100-104.

2. Satish Tailor, Thermal Spray Aluminum (TSA) Coating